Docker拉取命令

docker pull swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest
docker tag  swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest  ghcr.io/simonqvq/deepseek-harness:latest

Containerd拉取命令

ctr images pull swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest
ctr images tag  swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest  ghcr.io/simonqvq/deepseek-harness:latest

Shell快速替换命令

sed -i 's#ghcr.io/simonqvq/deepseek-harness:latest#swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest#' deployment.yaml

Ansible快速分发-Docker

#ansible k8s -m shell -a 'docker pull swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest && docker tag  swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest  ghcr.io/simonqvq/deepseek-harness:latest'

Ansible快速分发-Containerd

#ansible k8s -m shell -a 'ctr images pull swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest && ctr images tag  swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest  ghcr.io/simonqvq/deepseek-harness:latest'

镜像构建历史

# 2026-09-05 11:28:23  0.00B 配置容器启动时运行的命令
ENTRYPOINT ["/entrypoint.sh"]
                        
# 2026-09-05 11:28:23  0.00B 指定检查容器健康状态的命令
HEALTHCHECK {Test:[CMD-SHELL wget --no-verbose --tries=1 --spider http://127.0.0.1:${DSH_PORT:-3079}/ || exit 1] Interval:30s Timeout:5s StartPeriod:15s StartInterval:0s Retries:3}
                        
# 2026-09-05 11:28:23  0.00B 执行命令并创建新的镜像层
RUN /bin/sh -c mkdir -p /workspace # buildkit
                        
# 2026-09-05 11:28:23  0.00B 设置工作目录为/workspace
WORKDIR /workspace
                        
# 2026-09-05 11:28:23  3.56KB 执行命令并创建新的镜像层
RUN /bin/sh -c chmod +x /entrypoint.sh # buildkit
                        
# 2026-09-05 11:28:23  3.56KB 复制新文件或目录到容器中
COPY entrypoint.sh /entrypoint.sh # buildkit
                        
# 2026-09-05 11:28:23  1.81KB 复制新文件或目录到容器中
COPY Caddyfile.template /etc/caddy/Caddyfile.template # buildkit
                        
# 2026-09-05 11:28:23  0.00B 声明容器运行时监听的端口
EXPOSE [3080/tcp]
                        
# 2026-09-05 11:28:23  0.00B 设置环境变量 PROXY_PORT
ENV PROXY_PORT=3080
                        
# 2026-09-05 11:28:23  0.00B 设置环境变量 DSH_PORT
ENV DSH_PORT=3079
                        
# 2026-09-05 11:28:23  0.00B 设置环境变量 DSH_HOST
ENV DSH_HOST=127.0.0.1
                        
# 2026-09-05 11:28:23  0.00B 设置环境变量 DSH_PERMISSION_MODE
ENV DSH_PERMISSION_MODE=danger-full-access
                        
# 2026-09-05 11:28:23  0.00B 设置环境变量 DSH_HOME
ENV DSH_HOME=/opt/dsh-home
                        
# 2026-09-05 11:28:23  0.00B 复制新文件或目录到容器中
COPY /opt/dsh-home /opt/dsh-home # buildkit
                        
# 2026-09-05 11:28:23  47.00B 执行命令并创建新的镜像层
RUN /bin/sh -c ln -sf ../lib/node_modules/@deepseek-ai/dsh/lib/bin.js /usr/local/bin/dsh # buildkit
                        
# 2026-09-05 11:28:23  223.12MB 复制新文件或目录到容器中
COPY /usr/local/lib/node_modules /usr/local/lib/node_modules # buildkit
                        
# 2026-08-28 18:08:05  181.07MB 执行命令并创建新的镜像层
RUN /bin/sh -c apt-get update && apt-get install -y --no-install-recommends         caddy wget gettext         bash curl jq git         vim nano         procps coreutils ca-certificates         python3 python3-pip python3-venv         cmake build-essential         zip unzip     && rm -rf /var/lib/apt/lists/*     && python3 -m pip config set global.break-system-packages true # buildkit
                        
# 2026-08-28 01:03:21  0.00B 设置默认要执行的命令
CMD ["node"]
                        
# 2026-08-28 01:03:21  0.00B 配置容器启动时运行的命令
ENTRYPOINT ["docker-entrypoint.sh"]
                        
# 2026-08-28 01:03:21  388.00B 复制新文件或目录到容器中
COPY docker-entrypoint.sh /usr/local/bin/ # buildkit
                        
# 2026-08-28 01:03:21  5.34MB 执行命令并创建新的镜像层
RUN /bin/sh -c set -ex   && export GNUPGHOME="$(mktemp -d)"   && for key in     6A010C5166006599AA17F08146C2130DFD2497F5   ; do     { gpg --batch --keyserver hkps://keys.openpgp.org --recv-keys "$key" && gpg --batch --fingerprint "$key"; } ||     { gpg --batch --keyserver keyserver.ubuntu.com --recv-keys "$key" && gpg --batch --fingerprint "$key"; } ;   done   && curl -fsSLO --compressed "https://yarnpkg.com/downloads/$YARN_VERSION/yarn-v$YARN_VERSION.tar.gz"   && curl -fsSLO --compressed "https://yarnpkg.com/downloads/$YARN_VERSION/yarn-v$YARN_VERSION.tar.gz.asc"   && gpg --batch --verify yarn-v$YARN_VERSION.tar.gz.asc yarn-v$YARN_VERSION.tar.gz   && gpgconf --kill all   && rm -rf "$GNUPGHOME"   && mkdir -p /opt   && tar -xzf yarn-v$YARN_VERSION.tar.gz -C /opt/   && ln -s /opt/yarn-v$YARN_VERSION/bin/yarn /usr/local/bin/yarn   && ln -s /opt/yarn-v$YARN_VERSION/bin/yarnpkg /usr/local/bin/yarnpkg   && rm yarn-v$YARN_VERSION.tar.gz.asc yarn-v$YARN_VERSION.tar.gz   && yarn --version   && rm -rf /tmp/* # buildkit
                        
# 2026-08-28 01:03:18  0.00B 设置环境变量 YARN_VERSION
ENV YARN_VERSION=1.22.22
                        
# 2026-08-28 01:03:18  201.16MB 执行命令并创建新的镜像层
RUN /bin/sh -c ARCH= && dpkgArch="$(dpkg --print-architecture)"   && case "${dpkgArch##*-}" in     amd64) ARCH='x64';;     ppc64el) ARCH='ppc64le';;     s390x) ARCH='s390x';;     arm64) ARCH='arm64';;     *) echo "unsupported architecture"; exit 1 ;;   esac   && export GNUPGHOME="$(mktemp -d)"   && set -ex   && for key in     5BE8A3F6C8A5C01D106C0AD820B1A390B168D356     DD792F5973C6DE52C432CBDAC77ABFA00DDBF2B7     CC68F5A3106FF448322E48ED27F5E38D5B0A215F     8FCCA13FEF1D0C2E91008E09770F7A9A5AE15600     890C08DB8579162FEE0DF9DB8BEAB4DFCF555EF4     C82FA3AE1CBEDC6BE46B9360C43CEC45C17AB93C     108F52B48DB57BB0CC439B2997B01419BD92F80A     655F3B5C1FB3FA8D1A0CA6BDE4A7D232B936D2FD     A363A499291CBBC940DD62E41F10027AF002F8B0   ; do       { gpg --batch --keyserver hkps://keys.openpgp.org --recv-keys "$key" && gpg --batch --fingerprint "$key"; } ||       { gpg --batch --keyserver keyserver.ubuntu.com --recv-keys "$key" && gpg --batch --fingerprint "$key"; } ;   done   && curl -fsSLO --compressed "https://nodejs.org/dist/v$NODE_VERSION/node-v$NODE_VERSION-linux-$ARCH.tar.xz"   && curl -fsSLO --compressed "https://nodejs.org/dist/v$NODE_VERSION/SHASUMS256.txt.asc"   && gpg --batch --decrypt --output SHASUMS256.txt SHASUMS256.txt.asc   && gpgconf --kill all   && rm -rf "$GNUPGHOME"   && grep " node-v$NODE_VERSION-linux-$ARCH.tar.xz\$" SHASUMS256.txt | sha256sum -c -   && tar -xJf "node-v$NODE_VERSION-linux-$ARCH.tar.xz" -C /usr/local --strip-components=1 --no-same-owner   && rm "node-v$NODE_VERSION-linux-$ARCH.tar.xz" SHASUMS256.txt.asc SHASUMS256.txt   && ln -s /usr/local/bin/node /usr/local/bin/nodejs   && node --version   && npm --version   && rm -rf /tmp/* # buildkit
                        
# 2026-08-28 01:03:18  0.00B 设置环境变量 NODE_VERSION
ENV NODE_VERSION=24.20.0
                        
# 2026-08-28 01:02:18  8.94KB 执行命令并创建新的镜像层
RUN /bin/sh -c groupadd --gid 1000 node   && useradd --uid 1000 --gid node --shell /bin/bash --create-home node # buildkit
                        
# 2026-08-25 10:19:04  656.10MB 执行命令并创建新的镜像层
RUN /bin/sh -c set -ex; 	apt-get update; 	apt-get install -y --no-install-recommends 		autoconf 		automake 		bzip2 		default-libmysqlclient-dev 		dpkg-dev 		file 		g++ 		gcc 		imagemagick 		libbz2-dev 		libc6-dev 		libcurl4-openssl-dev 		libdb-dev 		libevent-dev 		libffi-dev 		libgdbm-dev 		libglib2.0-dev 		libgmp-dev 		libjpeg-dev 		libkrb5-dev 		liblzma-dev 		libmagickcore-dev 		libmagickwand-dev 		libmaxminddb-dev 		libncurses5-dev 		libncursesw5-dev 		libpng-dev 		libpq-dev 		libreadline-dev 		libsqlite3-dev 		libssl-dev 		libtool 		libwebp-dev 		libxml2-dev 		libxslt-dev 		libyaml-dev 		make 		patch 		unzip 		xz-utils 		zlib1g-dev 	; 	apt-get dist-clean # buildkit
                        
# 2026-08-25 09:38:30  184.94MB 执行命令并创建新的镜像层
RUN /bin/sh -c set -eux; 	apt-get update; 	apt-get install -y --no-install-recommends 		git 		mercurial 		openssh-client 		subversion 				procps 	; 	apt-get dist-clean # buildkit
                        
# 2026-08-25 08:50:59  60.19MB 执行命令并创建新的镜像层
RUN /bin/sh -c set -eux; 	apt-get update; 	apt-get install -y --no-install-recommends 		ca-certificates 		curl 		gnupg 		netbase 		sq 		wget 	; 	apt-get dist-clean # buildkit
                        
# 2026-08-24 08:00:00  119.92MB 
# debian.sh --arch 'amd64' out/ 'trixie' '@1787529600'
                        
                    

镜像信息

{
    "Id": "sha256:ffdead72a5f33ecf382781f44b4dd5eec2e1dfcf17dd6eb64adf8c2f6c59ed59",
    "RepoTags": [
        "ghcr.io/simonqvq/deepseek-harness:latest",
        "swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness:latest"
    ],
    "RepoDigests": [
        "ghcr.io/simonqvq/deepseek-harness@sha256:95aa3ffba21ddf43d89fda3ec776f24dd5be363e1ce3c2f1a8481e382285d533",
        "swr.cn-north-4.myhuaweicloud.com/ddn-k8s/ghcr.io/simonqvq/deepseek-harness@sha256:b1acd18bebad38c9d756288efa815da6564694e3c7a25a5fe2162f5f7dcc7634"
    ],
    "Parent": "",
    "Comment": "buildkit.dockerfile.v0",
    "Created": "2026-09-05T03:28:23.869140687Z",
    "Container": "",
    "ContainerConfig": null,
    "DockerVersion": "",
    "Author": "",
    "Config": {
        "Hostname": "",
        "Domainname": "",
        "User": "",
        "AttachStdin": false,
        "AttachStdout": false,
        "AttachStderr": false,
        "ExposedPorts": {
            "3080/tcp": {}
        },
        "Tty": false,
        "OpenStdin": false,
        "StdinOnce": false,
        "Env": [
            "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
            "NODE_VERSION=24.20.0",
            "YARN_VERSION=1.22.22",
            "DSH_HOME=/opt/dsh-home",
            "DSH_PERMISSION_MODE=danger-full-access",
            "DSH_HOST=127.0.0.1",
            "DSH_PORT=3079",
            "PROXY_PORT=3080"
        ],
        "Cmd": null,
        "Healthcheck": {
            "Test": [
                "CMD-SHELL",
                "wget --no-verbose --tries=1 --spider http://127.0.0.1:${DSH_PORT:-3079}/ || exit 1"
            ],
            "Interval": 30000000000,
            "Timeout": 5000000000,
            "StartPeriod": 15000000000,
            "Retries": 3
        },
        "Image": "",
        "Volumes": null,
        "WorkingDir": "/workspace",
        "Entrypoint": [
            "/entrypoint.sh"
        ],
        "OnBuild": null,
        "Labels": {
            "org.opencontainers.image.created": "2026-09-05T03:27:31.976Z",
            "org.opencontainers.image.description": "DeepSeek Harness Docker 镜像 | Caddy 反向代理 | 免密码认证 | Docker Hub: simonqvq/deepseek-harness | 一行命令启动",
            "org.opencontainers.image.licenses": "",
            "org.opencontainers.image.revision": "068a31bcc79d6e7cd1bbdc60ffad3b6f54b691ed",
            "org.opencontainers.image.source": "https://github.com/SimonQvQ/deepseek-harness-docker",
            "org.opencontainers.image.title": "deepseek-harness-docker",
            "org.opencontainers.image.url": "https://github.com/SimonQvQ/deepseek-harness-docker",
            "org.opencontainers.image.version": "20260905"
        }
    },
    "Architecture": "amd64",
    "Os": "linux",
    "Size": 1631852285,
    "GraphDriver": {
        "Data": {
            "LowerDir": "/var/lib/docker/overlay2/18f1c09fbd3048988fd42527eb41cd56994d08bd075f04d38c0e5cca1fb071e9/diff:/var/lib/docker/overlay2/a16b391ee174b267005864166bcb07bbc5dffe89830340c62bb8da12448dd9c3/diff:/var/lib/docker/overlay2/d55a51c0d53da5d3776a8409589da1ecd20363482c7a16fd8e52398c45067291/diff:/var/lib/docker/overlay2/7f00813be481904276868e70ffb1589271e2b2973f011f2bf9fe25a828088c57/diff:/var/lib/docker/overlay2/01197a01b715937f250569796380fb697d35a276c704a71c466766dddf1fbaee/diff:/var/lib/docker/overlay2/ad34aa6b38a6067fc9bc8ea4a19dcd798dd14b6351e620dcca011a6b2c5eb858/diff:/var/lib/docker/overlay2/9f972154ee341eed43501c33c8bb46b065c512cabaa8c016c8630a768cd4f747/diff:/var/lib/docker/overlay2/c4c4482d9c868444832ee3dffb5555da6951ca1a4338e993b1338336209a383f/diff:/var/lib/docker/overlay2/e0e24c7245d06671b7187a405c91869bc68040529f0e64bde92627f14d779f9b/diff:/var/lib/docker/overlay2/08ef6dc83468c1bb6299f37a21939e3f4a38bdc8b301d5cbec7fa6f8e7d474f0/diff:/var/lib/docker/overlay2/b0d820973147ca7bd913d86d0c937874b1e3da0376d3b77ca0911775c1e92520/diff:/var/lib/docker/overlay2/da615a5e61dbb5df670e85405c5c61933a58be31175c1c46dd93124af7ad9ae3/diff:/var/lib/docker/overlay2/39e1071ae2d4f9b52103f2158161b3cecef2df4c18a36dca510d813584a3b8d0/diff:/var/lib/docker/overlay2/50033a8653006e3fc5197632a9d971137a3fe073b12e001ddfea71a3730a4946/diff:/var/lib/docker/overlay2/39006695e138e56fc40162a698d16a4bb22d9ff2930e1f1b056b3a65f61cd0ea/diff:/var/lib/docker/overlay2/620bb111373cf7a151af489d5fc8a892097bddf6cc40ff147e09c2720be987b5/diff",
            "MergedDir": "/var/lib/docker/overlay2/cb5361732025dd3606d33ab3af26bc9a9299747eaeafbaba96cd1e337a68d6f4/merged",
            "UpperDir": "/var/lib/docker/overlay2/cb5361732025dd3606d33ab3af26bc9a9299747eaeafbaba96cd1e337a68d6f4/diff",
            "WorkDir": "/var/lib/docker/overlay2/cb5361732025dd3606d33ab3af26bc9a9299747eaeafbaba96cd1e337a68d6f4/work"
        },
        "Name": "overlay2"
    },
    "RootFS": {
        "Type": "layers",
        "Layers": [
            "sha256:31631a95db7cd650d1c826f269b9e93b57d9f418128bf7c5499b4403be4d44d0",
            "sha256:7c367ef8c1ea18872336c6bc0672b2ff7fee5dc56c055ce54e62f2ccfde4f847",
            "sha256:144ea2bdbdf828c7c9867865b4eeffc5ec977e8e686cdfd1e240a890e9d4cf8e",
            "sha256:758a60093d45fcab0f50466c34253fcdaea5dbb0bacd6495bda7d4e8d90e61d6",
            "sha256:a346c1434c454a57b16943d112f98b335503a60bfc034534c33f5c8b7856b0c9",
            "sha256:42f0d56292a19997e680f319ca5f47b3ac749ba4f6f265fb22014669063d133e",
            "sha256:3d22ec7689ab203b93688dc58522108c11de7a006dc94391a7ce0cd8300286a1",
            "sha256:53d596bffe42d069217feb005b80cfaf94eea7c9a0361d1be6ad5a4773fe5f6b",
            "sha256:fe82177afcaa6d90e9a95fb8c11b4d1777a5afe521a71860935921b04a786a72",
            "sha256:d62e425722694a21ce77449b20225e6da91c2d78dcd816c80072b1bd35c64969",
            "sha256:5ddf51161076b55f6b64af34eb6a4559b0e34d5ef48bc37f3dbf5ac9a36f7038",
            "sha256:33fac49c44f72cf16499c145145cdda77f8c5b3e1aa0609f8b1b51e885a0a09b",
            "sha256:4a828a99872ae8c324b0675b401fc2282d806036f2ca3da1b9d4387a5356114a",
            "sha256:229adfb753d24927d95bda2c694ca01668d1ccd162e9dff4552f9e5e8519a7b2",
            "sha256:8cbe0e41bc3c6c7dd91e2458828a2ebe70bec79d7756192903836676a5437669",
            "sha256:ed46ee1ec187340cb959404f66ddfb05c7e652551dc8acc88b77060e6faa31bd",
            "sha256:5f70bf18a086007016e948b04aed3b82103a36bea41755b6cddfaf10ace3c6ef"
        ]
    },
    "Metadata": {
        "LastTagTime": "2026-09-05T21:13:08.155920983+08:00"
    }
}